Technology and equipment can produce screw machine self-locking thread technology

1, What is self-locking screw machine thread technology

self-locking screw machine thread technology features are: a male and a female deputy to the composition of a self-locking screw machine threaded performance. Can not and do not add other fillers and other things.

We do not doubt is: a male and a female deputy with the composition of the thread, it can achieve self-locking. If we compare the well-known Americans in the wedge thread (must be firmly applied.)

2, the "ideal self-locking screw" technology is what

Ideally, the best self-locking screw technology is to achieve "common thread is self-locking screw" technology, which is a patented technology. That is, with the common thread existing production equipment, production technology and production costs, can easily produce from the lock screw to. And the use and operation, with the traditional thread is the same, it can also repeat the assembly and disassembly, re-use.

And other "self-locking screw machine thread" The difference is, this "common thread is self-locking screw" does not like the wedge thread, as to undermine the thread tooth type, tooth type is still the standard tooth type. Therefore, it can be compatible with common thread in all the mechanical properties, to ensure that the basis of load, and the other with self-locking performance.

Therefore, we call this special self-locking screw technology for the "ideal self-locking screw" technology.

3, self-locking screw thread why not?

We should find it strange is that common thread is not designed according to the principle of self-locking it? How self-locking would not it?

Is not the case. Common thread is not to "the principle of self-locking screw," to design, it is only in one direction (axial) the use of the "principle of self-locking ramp" instead of "the principle of self-locking screw." This principle and are temporarily in this discussion.

Please check the performance of common thread, it is only "mechanical" and "proof load," the two, and there is no "self-locking performance," this one. This can be seen from the other hand, the general assessment of its self-locking screw is not performance, it is not objectively self-locking performance.

4, to achieve common thread is the "ideal of self-locking screw," What is difficult?

Of production "common thread is the` ideal `self-locking screw," is not difficult, just replace the equivalent forming tool can, and production technology and equipment is the same.

5, the common thread with the "ideal self-locking screw thread" in the tooth type, what is the difference?

That "self-locking screw," in fact we are referring to "self-locking screw vice." Objectively, there is no separate "self-locking screw machine threads" or "self-locking bolt," "self-locking nut," the.

But we used to, but also the thread there is a difference with the traditional male or female, it is threaded with the standard, we could form a "self-locking screw vice", and also known as "self-locking screw was." After the discussion, which we should pay attention.

The simplest "ideal self-locking screw vice," the common thread is a standard self-locking screw with a locking screw to match the composition vice. This "ideal self-locking screw vice," a standard by the traditional male and a self-locking internal thread, or a standard conventional self-locking internal thread and a male component.

The tooth type, the so-called self-locking screw-type teeth are designed to be close to the standard screw-type dental point of view, the naked eye can not see the difference we are.

6, the common thread deputy and the "ideal self-locking screw vice", in the sense that the biggest difference?

Standardization of the "ideal self-locking screw vice," we generally design to eliminate the gap between internal and external threads. When used, it seems as normal as ordinary thread, easy to screw in, screw in the position to be reached when the gap between internal and external threads can be completely eliminated.

Thus, the "ideal self-locking screw vice" from the surface can also be felt, it can be anti-lateral vibration, to achieve self-locking (locking).

7, the common thread deputy and the "ideal self-locking screw vice," the real difference

Associate with the common thread that the "ideal self-locking screw vice," the difference is: ordinary screw-type vice inside and outside the thread angle is equal teeth, but the "ideal self-locking screw vice" design basis for the establishment of the conditions or type of angle is not equal teeth - - In theory, if not equal, you can self-locking. In practice, we had better material according to the specific thread, type and specifications for the best parameters.

On "the theory of self-locking screw mechanical model of vice", we will introduce another paper.

8, the ideal self-locking screw machine thread technology, high-precision thread in which implicit

Mentioned earlier, the "ideal self-locking screw vice, using a standard self-locking screw thread and an ideal associate to form the thread performance with self-locking," then, is not it can be produced by our present standard thread with this new self- lock screw threads to match the composition of Vice, to have self-locking performance?

In principle that is correct, but in fact, we still require the use of production of high precision screw technology to produce standard thread. Only then will we be possible to achieve production and use of the kind of "radial interference fit with the ideal of self-locking screw vice - an absolutely reliable self-locking screw vice."

Come from: http://www.thescrewmachine.com